DS3695 IC - (SMD Package) - Multipoint RS485/RS422 Transceivers IC

In Stock

Brand: Generic | SKU: 2898468

₹ 238.00

~~₹ 383.00~~

Save 38%

Tax Included and Shipping Rate Calculated at Checkout

Min Qty: 1

Check Delivery Availability:

Enter your pincode to check delivery options

Offer & Other Details

Payment Offer: 2% Instant Discount on UPI and bank Transfer Payments.
Partial COD: Pay 25% Advance now and Balance on Delivery (COD).
Sales Assistance: Contact us +91 8903831010 for personalized advice.

Description

The DS3695 is high speed differential TRI-STATEÂ® bus/line transceiver/repeater designed to meet the requirements of EIA standard RS485 with extended common mode range (+12V to âˆ’7V), for multipoint data transmission.

The driver and receiver outputs feature TRI-STATE capability. The driver outputs remain in TRI-STATE over the entire common mode range of +12V to âˆ’7V. Bus faults that cause excessive power dissipation within the device trigger a thermal shutdown circuit, which forces the driver outputs into the high impedance state. The DS3696 provides an output pin TS (thermal shutdown) which reports the occurrence of the thermal shutdown of the device. This is an â€œopen collectorâ€ pin with an internal 10 kâ„¦ pull-up resistor. This allows the line fault outputs of several devices to be wire OR-ed.

Both AC and DC specifications are guaranteed over the 0ËšC to 70ËšC temperature and 4.75V to 5.25V supply voltage range.

Features of DS3695 IC:-

Meets EIA standard RS485 for multipoint bus transmission and is compatible with RS-422
15 ns driver propagation delays with 2 ns skew (typical)
Single +5V supply
âˆ’7V to +12V bus common mode range permits Â±7V ground difference between devices on the bus
Thermal shutdown protection
High impedance to bus with driver in TRI-STATE or with power off, over the entire common mode range allows the unused devices on the bus to be powered down
Combined impedance of a driver output and receiver input is less than one RS485 unit load, allowing up to 32 transceivers on the bus
70 mV typical receiver hysteresis