74LS962 Dual Rank 8-Bit Tri-State Shift Register IC (74962 IC) DIP-16 Package

These circuits are TRI-STATE, edge-triggered, 8-bit I/O registers in parallel with 8-bit serial shift registers which are capable of operating in any of the following modes: parallel load from I/O pins to register ‘‘A’’, parallel transfer down from register ‘‘A’’ to serial shift register ‘‘B’’, parallel transfer up from shift register ‘‘B’’ to register ‘‘A’’, serial shift of register ‘‘B’’, or exchange data between register ‘‘A’’ and shift register ‘‘B’’. Since the registers are edge-triggered by the positive transition of the clock, the control lines which determine the mode or operation are completely independent of the logic level applied to the clock. Designed for bus-oriented systems, these circuits have their TRI-STATE inputs and outputs on the same pins.

Features :-

• Registers are edge-triggered by the positive transition of the clock
• All inputs are PNP transistors
• Input disable dominates over output disable
• Output high impedance state does not impede any other mode of operation
• 8-bit I/O pins are TRI-STATE buffers
• Typical shift frequency is 36 MHz
• Typical power dissipation is 305 mW
• All control inputs are active when in an ‘‘L’’ logic state
• Devices can be cascaded into N-bit word

Specifications :-

• Supply Voltage : 4.75V - 5.25V
• High-Level Input Voltage Min : 2V
• Low-Level Input Voltage Max : 0.8V
• High-Level Output Current Max : -5.2mA
• Low-Level Output Current Max : 16mA
• Free Air Operating Temperature Max : 70°C

Package Includes :-

1 X 74LS962 Dual Rank 8-Bit Tri-State Shift Register IC (74962) IC DIP-16 Package