1/4 Inch Brass Water Flow Sensor SEN-HZ41WC

1/4 Inch Brass Water Flow Sensor SEN-HZ41WC
The SEN-HZ41WC water flow sensor is a device that is used to measure the flow rate of water. It consists of a turbine-type rotor that is placed in the water stream, and as the water flows past the rotor, it causes the rotor to spin. The sensor measures the speed of the rotor and converts it to a flow rate. The sensor has a digital output, which means that it provides a digital signal that can be read by a microcontroller or other host device. The sensor is commonly used in applications such as irrigation systems, water treatment plants, and industrial process control. It is often preferred over other types of flow sensors because it is easy to install and has a low cost.
Now easily measure water (liquid) flow in your application using this 1/4″ Brass water flow sensor. This is a good quality flow sensor with a brass body and can be used for industrial and commercial applications. This 1/4 inch water flow sensor is used extensively in various types of vending machines.
Note:
When magnetic material is close to the sensor, its characteristics may vary.
In order to avoid particle debris, the sensor must be installed after a filter.
The flow sensor installation has to avoid strong vibration and shaking of the environment, so as not to affect the sensor’s measurement accuracy.
Applications:
Widely used in water industrial fields
Thermostatic water heaters
Water purifiers
Water dispensers
Smart card equipment
Coffee machine
Package Includes:
1 x SEN-HZ41WC Water Flow Sensor
Specifications:
Water quality requirement
Drinking water health standards, 0~80℃
Voltage/electric current
DC 4.5 ～ 18 Volt, ≤15mA
Output level
Rated voltage DC 5 Volt, high level ≥4.5 Volt, low level ≤0.5 Volt
Cumulative flow conversion
1 Liter water=1780 pulse, accuracy: 8%